Xerox 7000AP 补充手册

DocuColor 7000AP/8000AP Decurler Adjustment

Decurler Adjustment

Decurler E Table Settings

While the system is programmed to correct for curl under most

conditions, there may be instances where the pre programmed

settings (System Default and Paper Type A - D) may not meet

your curl requirements. Using the Decurler E Table Settings allows

you to enter a percentage of toner area coverage range to help

eliminate curl.

NOTE: The examples that follow are designed to give you an
understanding of programming the Decurler E Table Settings
option to obtain optimal results, but due to various job stock and
environmental conditions the manner in which you achieve the
best results may vary.

The most important aspect for creating Decurler E Table Settings

is determining the percentage of toner area coverage on the

curled paper. A sampling of percentage of toner area coverage on

some typical customer documents follows.

NOTE: The following percentage of toner area coverage
examples have been measured using the particular application’s
tools which created them. If you do not have access to an
application’s tools, which measure percentage of toner area
coverage, make your estimate using the following examples as a
guide. Your estimates will be used when entering

Decurler E Table

Settings

values, which is explained later in this section.

Percentage of Toner Area Coverage examples

Carousel Horses

Bolivar Ltd.

Dunn Report

Percentage of Toner Area

Coverage per Color

Percentage of Toner Area

Coverage per Color

Percentage of Toner Area

Coverage per Color

Black

30.5% Black

5.4%

Black

10.8%

Magenta

28.1%

Magenta

4.3%

Magenta

8.5%

Cyan

23.8%

Cyan

6.0%

Cyan

8.5%

Yellow

29.5%

Yellow

6.7%

Yellow

7.2%