Manualsbrain.com
  1. 份说明书
  2. 个品牌
  3. Xerox
  4. 8000
  5. 参考指南

Xerox 8000 参考指南

下载
页码 共 15
W
ELCOME
10
 
Configuring the network server
 
If you require a network server, you must configure it to provide user access to the 
Fiery EXP8000 as a networked printer before you configure Fiery EXP8000 network settings 
in Setup. For more information, see 
 
 
 
Connecting the Fiery EXP8000 to a functioning network
 
When you add the Fiery EXP8000 to a network, it is assumed that a network administrator 
has already installed a network cabling system and has connected computers and servers.
 
T
 
O
 
 
 
CONNECT
 
 
 
THE
 
 F
 
IERY 
 
EXP8000 
 
TO
 
 
 
A
 
 
 
NETWORK
 
1 Prepare a network node for the Fiery EXP8000.
2 Connect the Fiery EXP8000 to the digital press. 
3 Attach the network cable to the network connector of the Fiery EXP8000. 
 
 
 
.
 
4 Print a Test Page to verify that the digital press is functioning normally.
 
 
 
.
 
Setting up the Fiery EXP8000
 
Setup configures the Fiery EXP8000 to communicate with other devices and manage print 
jobs. You must perform Setup the first time you turn on the Fiery EXP8000 after new system 
software is loaded, or any time that Server software is reinstalled. 
 
N
 
OTE
 
: 
 
Setup from the Control Panel is not supported. Use local or remote Setup. For more 
 
 
.
Configure the Setup menus in the following order:
 
Server Setup
 
 specifies system options.
 
Network Setup
 
 specifies all the active network systems that transmit print jobs to the 
Fiery EXP8000.
 
Printer Setup
 
 specifies how print jobs and queues are managed.
This is the minimum configuration required to enable your Fiery EXP8000 so that users can 
begin printing. To configure network settings in Setup, you need a live network connection so 
that the Fiery EXP8000 can query the network for zones, servers, and server-based queues.