Xerox 4517 用户指南
L o a d i n g P a p e r
2-12 ❖ D o c u P r i n t 4 5 1 7
/
4 5 1 7 m p U s e r G u i d e
Using the
500-sheet Paper
Deck and Cassette
The optional 500-sheet Paper Deck and Cassette holds 500
sheets of 20 lb (75 g/m
2
) paper. Refer to the section “Selecting
Paper” (page 2-3) for acceptable paper sizes and weights.
(See Appendix A for ordering information and Appendix C
for installation instructions.)
Caution
•
Do not attempt to load the 500-sheet Paper Deck and
Cassette during printing.
Cassette during printing.
•
Do not overfill the paper cassette.
If you are not changing paper size, go to
Step 2.
1
Adjust the end and width guides to fit the
size of paper you are loading.
A
Lift up one side of the end guide (1) at
the rear of the tray, then lift up the
other side of the end guide.
B
Pull out the tray to lengthen it, or push
it in to shorten it.
C
Press both sides of the end guide down
until it clicks into place at the desired
length.
D
Slide the width guide (2) to fit the
width of the paper.
2
Load paper. Refer to Figure 2.4 on
page 2-13 for correct paper orientation.
chapter2.frm Page 12 Friday, July 11, 1997 8:13 PM