Xerox N2025 用户指南

❖

If you have any problems with the operation of your 
printer, refer to Table 5.2 for suggested remedies.

The printer will not print 
at all, or a file sent from 
the client/server will not 
print.

• Check with your network administrator to see that the printer is powered up, 

connected to the network and that the network is operational.

• Check Control Panel messages for “Paper Jam,” “Close Covers,” etc.

• If the port (parallel or network) the printer is connected to is disabled, enable 

it. Check the Configuration Sheet for the port you are using to see if the Port 
Enable item in the appropriate Interface Menu is set to 

. If it is set to 

, 

set it to 

 and try again. 

• If the printer has printed recently, do the following:

- Attempt to print a Configuration Sheet. If it does not print, contact your 

customer support center.

- If the Configuration Sheet prints, check to see that the printer is configured 

properly. 

- If the printer is configured properly, check the Configuration Sheet to 

confirm that the correct emulation is (PDL) enabled for the port or 
protocol you are using.

- If the correct emulation is (PDL) enabled and the printer continues not to 

print, contact your customer support center.

Table 5.2 Page 1 of 4