Xerox N2025 安装指导
OS/2 Warp Ser ver (LAN Server) Network
Quick Network Install Guide
❖
37
OS/2 Warp Server
(LAN Server) Network
(LAN Server) Network
Quick Install Steps
1
Print the Configuration Sheet. Details are in this
document in Appendix A: Print The Configuration
Sheet.
document in Appendix A: Print The Configuration
Sheet.
2
Check the Configuration Sheet and verify that both
TCP/IP protocol and proper connector are enabled on the
printer.
TCP/IP protocol and proper connector are enabled on the
printer.
3
Create a new printer to load print drivers. Details for this
are found in the Technical Information Guide.
are found in the Technical Information Guide.
4
Create a network printer resource and its permissions.
5
Start LPRPORTD/LPRMON, ping printer, open EPM and
send a print job to the printer.
send a print job to the printer.
6
Check the print job for print quality. If print quality
problems exist, use the print quality section of your
printer System Administrator Guide to correct the
problem.
problems exist, use the print quality section of your
printer System Administrator Guide to correct the
problem.
7
If your print job did not print, see the Troubleshooting
section for your operating system in the Technical
Information Guide to correct the problem.
section for your operating system in the Technical
Information Guide to correct the problem.