Xerox N2125 用户指南
Solving Print Quality Problems
Chapter 5: Troubleshooting
❖
5-29
Solving Print Quality Problems
If you have any problems with your printer’s printed
output, refer to Table 5.3 for suggested remedies.
output, refer to Table 5.3 for suggested remedies.
The cases listed in Table 5.3 are probable cases only, and may
not represent all of the possible cases which may occur under
actual operating conditions. If you experience a problem which
does not seem to fall under any of the cases listed in this table,
or if you are concerned about any other aspect of printer
operation, contact your service provider.
not represent all of the possible cases which may occur under
actual operating conditions. If you experience a problem which
does not seem to fall under any of the cases listed in this table,
or if you are concerned about any other aspect of printer
operation, contact your service provider.
Table 5.3
Print Quality Problems
Problem
Possible Cause(s)
Corrective Action(s)
Light/faint prints
Overall image is lighter
than normal.
than normal.
Toner Saver mode.
Turn off Toner Saver.
Toner level low/empty.
Remove the laser print cartridge carefully
and vigorously shake it several times, then
reinstall it. (This may help redistribute the
remaining toner before having to replace
the cartridge.)
and vigorously shake it several times, then
reinstall it. (This may help redistribute the
remaining toner before having to replace
the cartridge.)
Damp paper stock.
Replace paper stock.
Table 5.3 Page 1 of 8