Xerox N2825 用户手册
Windows Troubleshooting
4-28 ❖
DocuPrint Technical Information Guide
Windows NT 4.0
Troubleshooting
Troubleshooting
(DLC/LLC)
This troubleshooting section assumes:
• You have verified the operation of the printer using the
procedures found in
.
• You have loaded a DocuPrint PCL or PostScript print
driver.
• You have printed and retained a current copy of the
Configuration Sheet.
1
Verify this item in the upper left corner of the
Configuration Sheet:
Configuration Sheet:
• Hardware Address: (Note this address for later use).
2
From a workstation desktop use the right mouse button
and select Network Neighborhood then with the left
mouse button select Properties from the cascade menu.
and select Network Neighborhood then with the left
mouse button select Properties from the cascade menu.
3
The Network dialog will appear. Select the Protocols tab.
4
Check the list of installed network components for the
following item:
following item:
• DLC Protocol
5
If you have elected to run CentreWare DP you must also
have loaded Novell NetWare Client 32 and an IPX/SPX
Compatible protocol component. You may also discover
printers that have been assigned a TCP/IP address.
have loaded Novell NetWare Client 32 and an IPX/SPX
Compatible protocol component. You may also discover
printers that have been assigned a TCP/IP address.
6
As required, install any components not listed and restart
the system.
the system.
7
Once rebooted, select the Start button and Settings, then
select the Printers folder. The printers window will appear.
select the Printers folder. The printers window will appear.
8
Verify that you have selected the correct driver for your
printer.
printer.
9
Right mouse click on the printer icon and select
Properties.
Properties.
10
Select the Ports tab.