Xerox 8400B 用户指南

 

 

 

Before PrinterMap can manage network printers, PrinterMap configuration and 
discovery processes must occur. PrinterMap is designed to assist in this process 
when it is first started. This section describes how PrinterMap assists in this 
process and where to look for additional information. By default, the install 
program starts the PrinterMap user interface (Topology window). Selecting 
PrinterMap from the Xerox PrinterMap program group is another way to get 
started.  

The first time the PrinterMap Topology window is started a welcome screen is 
displayed.  

The welcome screen is displayed every time PrinterMap is started until discover 
parameters are configured or the “Continue to show this window” box is 
unchecked. Select the OK button to continue.  The PrinterMap Configuration 
window is displayed. 

At minimum, PrinterMap requires the user to define discover parameters. The 
discover parameters specify how PrinterMap discovers network printers. After 
closing the Welcome screen, PrinterMap displays the PrinterMap configuration 
window. By default, the Discover panel is shown. PrinterMap automatically fills 
in as many parameters on the Discover panel as possible. IP parameters that 
PrinterMap supplies include the machine’s IP address, subnet mask and default 
gateway. PrinterMap also fills in the machine’s Novell preferred server, if 
applicable. Refer to “Discover Configuration” in Chapter 3 for more information 
on configuring PrinterMap’s discover process. 

Other PrinterMap configuration parameters may be specified at this time. Only 
discover configuration is required. Refer to “Configuring PrinterMap” for more 
information on configuring PrinterMap.