Xerox 8400B 用户指南

 

 

 

paper and toner descriptions and units are retrieved and displayed from the printer. 
If this information is unavailable the paper and toner description defaults to 
“Source N” and units defaults to “units”.  

The third portion of the 

 lists the  IP Address, IPX Address, 

MAC Address,  Serial Number,  and  Community String  used by the printer. 
Note that underneath the Serial Number value is an Edit button which brings up 
the 

.  

 

The existing serial number for the selected printer is displayed in the serial number 
edit box. Enter the new serial number in the edit box and select OK to save the 
change. PrinterMap sends a SNMP request to the printer with the new serial 
number. Note that the serial changed in this manner cannot be canceled by 
canceling the Properties window.  Select  Cancel to dismiss the window without 
making any changes.  

NOTE:   Serial numbers and serial number manipulation are available only for Xerox 

manufactured printers. The bottom window section allows configuration for 
up to three management application paths. Only the active application can 
be launched (i.e., the application visible in the Printer Management 
Application edit field). PrinterMap attempts automatically filling in one or 
more application paths when the printer is discovered. Typically these paths 
are the vendor specific printer management application or the HTTP address 
of the printer's internal web server. A Browse button is provided for 
executable and Launch locations. This Application button initiates the 
application. Any application may  be entered, including parameters, not 
exceeding 256 characters. 

Refer to “Launch Application” in Chapter 4 for more information on launching 
configured management applications.