Xerox N3225 用户手册
Solving Print Quality Problems
5-30 ❖ User Guide
Solving Print Quality Problems
Table 5.3 lists common print quality problems, the
possible cause, and recommended actions.
possible cause, and recommended actions.
The cases listed in Table 5.3 are probable causes only, and
may not represent all of the possible cases that may occur
under actual operating conditions. If you experience a problem
that does not seem to fall under any of the cases listed in this
table, or if you are concerned about any other aspect of printer
operation, contact your dealer.
may not represent all of the possible cases that may occur
under actual operating conditions. If you experience a problem
that does not seem to fall under any of the cases listed in this
table, or if you are concerned about any other aspect of printer
operation, contact your dealer.
Table 5.3
Print quality problems
Problem
Possible Cause(s)
Corrective Action(s)
Light/faint prints
Overall image is lighter
than normal.
than normal.
Draft Mode.
Turn off Draft Mode.
Toner level low/empty.
Remove the Laser Print Cartridge carefully
and vigorously shake it several times, then
re-install it. (This may help redistribute the
remaining toner before having to replace
the cartridge.) Refer to “Replacing the Laser
Print Cartridge” (page 4-3).
and vigorously shake it several times, then
re-install it. (This may help redistribute the
remaining toner before having to replace
the cartridge.) Refer to “Replacing the Laser
Print Cartridge” (page 4-3).
Damp paper stock.
Replace paper stock.
Table 5.3 Page 1 of 8