Xerox P1210 用户手册
U s e r G u i d e
1.4
C O N N E C T I O N S / C O N T R O L P A N E L
USB Cable
Connect cable.
(Sold separately)
Connect cable.
(Sold separately)
or
AC Power Cord
Connect to your printer to a
properly grounded outlet.
Turn the power on.
Connect to your printer to a
properly grounded outlet.
Turn the power on.
1
2
Connections
Control Panel
Cancel Button
To cancel print job, hold the cancel
button until all lights blink, then release.
To cancel print job, hold the cancel
button until all lights blink, then release.
Print Button
To print a Configuration Sheet, hold the print
button until all lights blink, then release.
button until all lights blink, then release.
Error Light
Blinking: Insufficient memory
On: Cover open, cartridge not installed or
Blinking: Insufficient memory
On: Cover open, cartridge not installed or
not seated properly
On with Paper Light: Paper jam
Manual Light
On: Multi-purpose tray
On: Multi-purpose tray
(manual feed) ready
Press print button to start job
Paper Light
On: Out of Paper
On with Error Light: Paper jam
On: Out of Paper
On with Error Light: Paper jam
Data Light
On: Ready to receive data
Slow blink: Receiving data
Fast blink: Printing
On: Ready to receive data
Slow blink: Receiving data
Fast blink: Printing
Note: When all lights are
blinking, this indicates a system
error. Turn the power off and
then back on to clear. If problem
persists, call your local Xerox
Helpline.
blinking, this indicates a system
error. Turn the power off and
then back on to clear. If problem
persists, call your local Xerox
Helpline.
Parallel Cable
Connect cable.
Connect cable.
Caution: Turn off your computer
before connecting your printer
cable or power cord.
before connecting your printer
cable or power cord.
P1210UG-8 6/30/00 3:59 PM Page 1.4