Xerox XJ6C 用户指南
Chapter 4 Troubleshooting the Printer
28
The document sent to the printer does not
print
Cause
Suggested Solution
The printer cable is not
connected properly.
connected properly.
Press and hold the Power/Reset
button for 2 to 5 seconds to turn
off the printer. Make sure the
printer cable is securely
connected to the printer and your
PC.
button for 2 to 5 seconds to turn
off the printer. Make sure the
printer cable is securely
connected to the printer and your
PC.
The printer is not mapped to the
local port.
local port.
Map the printer to LPT1. Use the
Details tab to map the port.
Details tab to map the port.
The printer cable is incorrect.
Use an IEEE 1284-compliant
parallel bi-directional interface
cable to connect the printer to
your PC.
parallel bi-directional interface
cable to connect the printer to
your PC.
The printer cable is damaged.
Check the printer cable and
replace it if damaged.
replace it if damaged.
The type of interface is incorrect.
Verify that the computer is using
the parallel interface. Check your
software manual to ensure that
your software communicates to
the interface port that your
printer is connected to.
the parallel interface. Check your
software manual to ensure that
your software communicates to
the interface port that your
printer is connected to.
Power LED is blinking.
Press and release the Resume/FF
button to continue printing.
button to continue printing.