Xerox 75 用户指南
Installation Planning Guide
Safety notes
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
2-9
Europe
The controller requires a 220-240V, 13 or 10 Amp grounded
receptacle.
receptacle.
Controller cautions
Follow all safety cautions, warnings, and instructions marked on
the controller.
the controller.
•
Ensure that the voltages and frequency rating of the power
receptacle match the electrical rating label on the equipment.
receptacle match the electrical rating label on the equipment.
•
Do not make electrical or mechanical modifications to the
equipment.
equipment.
•
Use the power cable that is supplied with your controller. Do
not use an extension cord, or remove or modify the power
cord plug. If the plug must be changed, a qualified electrician
must install the plug correctly on the power cord.
not use an extension cord, or remove or modify the power
cord plug. If the plug must be changed, a qualified electrician
must install the plug correctly on the power cord.
•
Plug the power cable directly into a correctly grounded
electrical outlet or into the power strip that is connected to
this outlet. If you are not sure whether or not the outlet is
correctly grounded, consult a qualified electrician.
electrical outlet or into the power strip that is connected to
this outlet. If you are not sure whether or not the outlet is
correctly grounded, consult a qualified electrician.
•
Do not use an adapter to connect the controller to an
electrical outlet that lacks a ground connection terminal.
electrical outlet that lacks a ground connection terminal.
•
The power switch functions as a standby type of device only.
The power cord serves as the primary disconnect device for
the system.
The power cord serves as the primary disconnect device for
the system.
•
Do not push objects into slots or openings on the equipment.
Electrical shock or fire may result.
Electrical shock or fire may result.
•
Do not obstruct ventilation openings. These openings
prevent overheating of the controller.
prevent overheating of the controller.
Printer power on/off indicator
A power-on/power-off indicator shows the state of the power for
the printer. This indicator is located to the left on the top front of
the printer and has a rectangular shape. This indicator glows
green when printer power is on and emits no light, is colorless,
when the printer power is off.
the printer. This indicator is located to the left on the top front of
the printer and has a rectangular shape. This indicator glows
green when printer power is on and emits no light, is colorless,
when the printer power is off.