Xerox 140 安装指导
2
Installation tips
Installing ink cartridges
When installing ink cartridges, be sure to press down on the cartridge until it
snaps into place.
snaps into place.
For more information on installing ink cartridges, see ÒInstalling ink cartridges,Ó
in Chapter 2 of the user manual.
in Chapter 2 of the user manual.
First-time power-up
When you turn on the printer
for the Þrst time
, the printer purges the ink jets.
This Þrst-time printhead initialization takes a few minutes. When the Þrst-time
power-up is complete, the printerÕs front panel displays
power-up is complete, the printerÕs front panel displays
ready
and the two
green lights on the front panel are lit.
When the Þrst-time power-up is complete, the printerÕs front panel may display
ink out
instead of
ready
.
If this happens, press the
SELECT
button. The
printer purges the ink jets again before displaying
ready
. In rare cases, the front
panel will display something other than
ready
after the second purge. If this
happens, turn the printer off, then on again. The printer will power-up correctly
the second time.
the second time.
The printer is shipped with the startup page enabled. However, when you turn
on the printer
on the printer
for the Þrst time
, or when you install a new print head, you may not
get a startup page. The printer will print a startup page on all subsequent
power-ups, until the startup page is disabled.
power-ups, until the startup page is disabled.
For more information on the printerÕs power-up sequence and the startup page,
see ÒConnecting the power and turning on the printer,Ó in Chapter 2 of the user
manual.
see ÒConnecting the power and turning on the printer,Ó in Chapter 2 of the user
manual.
4868-7-2
SELECT