Xerox 200e 用户手册

3

Before you begin the EtherTalk conÞguration, make sure that you have 
completed the following steps:

■

Your printer should be set up, connected to the network,  and 
turned on.  See your printerÕs user manual for information about 
setting up and turning on the printer.  For information about 
connecting the printer to the network, see ÒEthernet connectionÓ 
on page 2-6.

■

The Tektronix driver for your printer should be installed on every 
Macintosh and PC that will send print jobs to the printer.  For 
details on driver installation, see the manual that is shipped with 
your printer drivers and utilities diskettes.

If you connect the printer using EtherTalk, your computer must have 
AppleTalk Phase 2 software.  If you connect the printer using LocalTalk, 
AppleTalk Phase 2 is not required (Phase 1 will work).