Xerox 200e 用户手册
4
Novell NetWare Configuration
4-10
Network Utilities for Color Printers
NetWare quickstart procedure (Quick ConÞguration)
Before beginning this procedure, make sure that the printer is connected to
the network and turned on.
the network and turned on.
1.
Log on with supervisor privileges.
2.
Start the Advanced ConÞguration Tool:
a.
Change (CD) to the directory that contains the tool. For
example, if the tool is in F:\PUBLIC, type:
example, if the tool is in F:\PUBLIC, type:
CD F:\PUBLIC
b.
Type:
ACT
3.
Select Quick conÞguration from the ConÞgure menu.
4.
The available Tektronix printers are displayed. Select the
Tektronix printer you wish to conÞgure and press Enter. The
factory default print server name is in the following syntax:
Tektronix printer you wish to conÞgure and press Enter. The
factory default print server name is in the following syntax:
TEK
xxxxxx
where xxxxxx are the last six hex digits of the printerÕs Ethernet
Address.
Address.
Note
If the printer does not show up in the list of available printers, you
could have a network hardware problem or an incorrect frame
type (see ÒPrinter does not appear in the Advanced ConÞguration
ToolÓ on page 4-25).
could have a network hardware problem or an incorrect frame
type (see ÒPrinter does not appear in the Advanced ConÞguration
ToolÓ on page 4-25).
5.
When you have selected the Tektronix printer, a list of Þle servers
is displayed. Select the Þle server you wish to conÞgure and press
Enter
is displayed. Select the Þle server you wish to conÞgure and press
Enter
.
6.
You may be prompted to log in to the server. Log on with
supervisor privileges.
supervisor privileges.