Xerox 200e 用户手册

■

Do not turn on the printer yet.  Your printer should be set up and 
connected to the network.  See your printerÕs user manual for 
information about setting up the printer.  For information about 
connecting the printer to the network, see ÒEthernet connectionÓ 
on page 2-6.

■

Install the Þles from the UNIX version of your printerÕs network 
utilities diskettes on the hard disk of the workstation you will be 
using for the TCP/IP conÞguration.  For more information, see 
ÒInstalling Þles from your printerÕs network utilities diskettesÓ on 
page 5-3 or ÒDownloading Þles from the Tektronix Color Printer 
Information ServerÓ on page 5-4.

■

Obtain the information listed in the following table.  It might be 
helpful to write this information down so you can refer to it later 
when you are performing the conÞguration.

Internet (IP) address for the printer

Format is x.x.x.x, where x represents a decimal number from 0 - 255.

Network mask

If you are unsure, leave this blank; the printer will choose an appropriate 
mask.

Broadcast address

This is the address the printer uses to send broadcast packets.  Regardless 
of how this parameter is set, the printer accepts broadcast packets from any 
of the commonly used broadcast address conventions.*  

If you are unsure, leave this blank; the printer will select an appropriate 
broadcast address.

Gateway IP address

You need this address if you want to communicate with the printer from 
anywhere other than the local network segment.

* The printer accepts packets with any ÒoldÓ (Òall zerosÓ) or ÒnewÓ (Òall onesÓ) style broadcast addresses.  It also 
accepts the IP Òall hostsÓ multicast address and user-speciÞed broadcast addresses.