Xerox 200e 用户手册

 

1

 

This manual provides information needed by system administrators and 
others who need to install Tektronix color printers equipped with an internal 
Ethernet interface.  Tektronix printers that do not support the internal 
Ethernet interface can be attached to Ethernet networks by using the 
Tektronix 4511A Network Interface.  The 4511A Network Interface supports 
the TCP/IP protocol (Transmission Control Protocol/Internet Protocol).  See 
your authorized Tektronix representative for 4511A ordering information.

 

■

 

Before using this manual, you should unpack and set up your 
Tektronix printer.  You should also install the appropriate drivers 
on any PC and Macintosh computers on your network.  
Instructions for these unpacking, set-up, and installation tasks are 
contained in your printerÕs user manual and the manual that is 
shipped with your Tektronix printerÕs drivers and utilities 
diskettes.  

 

■

 

After your printer is set up, use this network manual in 
conjunction with your printerÕs network utilities diskettes to 
conÞgure the printer for network operation.

Chapter 2 of this manual contains general information about the internal 
network interface in Tektronix color printers.  Whether you are installing the 
printer into an EtherTalk, NetWare, TCP/IP, or mixed environment, you 
should read this chapter.

Chapters 3, 4, and 5 explain conÞguration for EtherTalk, NetWare, and 
TCP/IP respectively.  Read the chapter(s) appropriate for your network.