Xerox 2135 用户指南

Installation Precautions

The Phaser 2135 printer options are easy to install; however, before you attempt to install 

(or remove) any printer options, please read and observe the following precautions.

THREE PEOPLE ARE REQUIRED WHEN LIFTING OR CARRYING THE 

PRINTER. The printer should always be lifted and carried by three people, as 

shown below. Exercise care in moving or relocating the printer. Follow the 
recommended procedure when moving the printer from one location to another. 

Refer to the Phaser 2135 Setup Instructions.

DISCONNECT THE POWER CORD: Never remove the printer controller board 

while the printer is plugged in. To avoid the possibility of electrical shock, 

always disconnect the power cord when installing or removing ANY internal or 
external printer option.

DISCHARGE STATIC ELECTRICITY: The controller board and internal printer 
options (Hard Drive and Memory) are sensitive to static electricity. Before 

installing or removing an internal option, discharge static electricity from your 

body by touching something metal, such as the metal back plate on any device 
plugged into a grounded power source. If you walk around before finishing the 

installation, again discharge any static electricity.

0748-01