Xerox 2135 用户指南

下载
页码 153
78
Phaser 2135 Color Printer
Troubleshooting 
Customer Replaceable Consumables (CRCs)
Expended consumables (toner cartridges, imaging drums, fuser, transfer belt) will prevent 
printing.
Maintain a supply of consumables (especially toner cartridges).
Replace consumables when prompted by the printer
Note
Specific instructions for replacing each consumable are included with the 
individual replacement packages.
Front Panel Messages
Your printer displays messages on the front panel when operator intervention is required. 
The two-line display of the front panel provides information about the condition of the 
printer and the suggested or required course of action. 
There are two types of messages that require action:
Fault messages appear when the printer stops due to a malfunction, such as a paper 
jam. Action must be taken to resolve the fault.
Attention messages do not stop the printer, but warn of action that should be taken to 
avert a shutdown.
The following table lists fault and attention messages in alphabetical order, along with an 
explanation and corrective action.
Front Panel Messages
Message
Type
Explanation/Corrective Action
Check Tray
[Check Tray 1]
[Check Tray 2]
[Check Tray 3]
[Check Tray 4]
[Check Tray 5]
No Tray Present
Fault
The specified tray is not installed. Make sure the 
tray is fully inserted.
Control Panel Error U15
Power Off/On
Fault
An error has been detected with the front panel 
interface and communication path. Turn off the 
printer, wait 15 seconds, then turn on the printer. If 
the problem persists, check the support links at: 
www.xerox.com/officeprinting/infoSMART.
Engine PU Fan Error U8
Power Off/On
Fault
An error has been detected with a cooling fan. Turn 
off the printer, wait 15 seconds, then turn on the 
printer. If the problem persists, check the support 
links at: 
www.xerox.com/officeprinting/infoSMART.