Xerox 220e 参考指南
9
Using Different Printer Language Modes
9-2
Phaser 220 Drivers and Utilities
Setting PostScript and HP-GL job and wait timeouts
Note
The HP-GL job timeout is the same as the PostScript job timeout.
The CONFIG.PS Þle changes the PostScript and HP-GL job and wait timeout
values. Changes are persistent across print jobs but not across printer
power cycles.
values. Changes are persistent across print jobs but not across printer
power cycles.
■
The wait timeout is the amount of time in seconds that the printer
waits for data to come from the computer during a job. If the
printer pauses for longer than the speciÞed number of seconds,
the job is discarded.
waits for data to come from the computer during a job. If the
printer pauses for longer than the speciÞed number of seconds,
the job is discarded.
■
The job timeout is the amount of time any single job may be active
before it must print. In PostScript mode, if the value is exceeded, a
timeout error is generated. In HP-GL mode, if the timeout value is
too small, an image may be split across two pages; if the value is
too large, multiple-page prints may be combined on one page.
before it must print. In PostScript mode, if the value is exceeded, a
timeout error is generated. In HP-GL mode, if the timeout value is
too small, an image may be split across two pages; if the value is
too large, multiple-page prints may be combined on one page.
Note
This Þle affects printer operation. If the printer is shared on a
network, using this Þle may affect the prints requested from
other users.
network, using this Þle may affect the prints requested from
other users.
1.
ConÞgure the printer port to receive PostScript.
2.
Locate the CONFIG.PS Þle in the PHSR220 directory on the Printer
Utilities diskette.
Utilities diskette.
3.
The default values for the printer are 0 seconds for the job timeout
and 40 seconds for the wait timeout. A timeout value of 0
indicates no timeout; the printer waits indeÞnitely.
and 40 seconds for the wait timeout. A timeout value of 0
indicates no timeout; the printer waits indeÞnitely.