Xerox 220e 参考指南

The Use Upper Tray, Use Lower Tray, and Use Either Tray Þles are 
compressed into the Phaser 220 Utilities.sea archive Þle on the 
Macintosh Printer Utilities diskette, and must be decompressed 
before you can use them.  To decompress these Þles, follow the 
steps listed under the topic ÒDecompressing the Macintosh utility 
ÞlesÓ in Chapter 1, ÒBefore You Begin.Ó  After decompressing 
these Þles, continue with the steps listed below.                 

Select the appropriate printer in the Chooser. 

Locate the Use Upper Tray, Use Lower Tray, and Use Either Tray Þles 
in the folder on your hard disk containing decompressed 
utility Þles.  

Double-click on each Þle's self-sending arrow icon.  Click OK in 
the dialog box to send each Þle to the printer.  

When sent to the printer, these Þles 
have the following features:  

■

With Use Upper Tray 

(UPPRTRAY.PS) and Use Lower 
Tray (LOWRTRAY.PS) the printer 
chooses only the tray selected with 
the Þle, and the printer will not 
automatically switch to the other tray 
when the selected tray is empty.  

■

With Use Either Tray (ANYTRAY.PS) 

the printer automatically switches to 
the upper tray when the lower tray is 
empty, if both trays contain the same 
media.  

■

File settings are overridden by the 

driver setting for prints made from 
the driver.

■

File settings persist across print jobs 

and across printer power cycles.