Xerox 220e 参考指南

To match colors on the charts to colors selected within an application, use the 
same printer color correction to print the charts that you are going to use 
when selecting and printing these colors within an application.  The 
following table lists the driver color correction settings with their 
corresponding utility Þles or switch settings.  For example, if you are going 
to print from an application with the driverÕs Vivid Blue option selected, 
then print the color chart with the Vivid Blue (VIVDBLUE.PS) utility Þle or 
set Switch 8 up and Switch 9 down on the Phaser 220i, or set Switch 3 up on 
the Phaser 220e.  Or, if you are not using a Tektronix driver, use the same 
utility Þle or switch setting to print the chart and to print from an      
application.  

*For the utility Þle color corrections to take effect, Switches 8 and 9 on a Phaser 220i must both be in the up position 
(Switch 3 up on the Phaser 220e) before the utility Þle is downloaded to the printer.  
**Make sure you use the same color correction to print the chart and to print the colors from an application. 

Or, for Vivid Blue:  
Switch 8 up and 
Switch 9 down

(standard defaults, or 
any utility Þle)**

(standard defaults, 
or any utility Þle)**

Or, for Simulate 
Press:  
Switch 8 down 
Switch 9 up

Or, for no color 
corrections:
Switch 8 down and 
Switch 9 down 

Or, for no color 
corrections:
Switch 3 down