Xerox 220e 参考指南
7
Using Fonts and SCSI Hard Disks
7-12
Phaser 220 Color Printers
Initializing a formatted SCSI hard disk
Use this procedure to initialize a formatted SCSI hard disk connected to a
Phaser 220i printer. Use one of the following Þles depending on your
computer type.
Phaser 220i printer. Use one of the following Þles depending on your
computer type.
*Available only on the Phaser 220i.
Macintosh users
1.
The LaserWriter Utility is compressed into the Phaser 220
Utilities.sea archive Þle on the Macintosh Printer Utilities diskette,
and must be decompressed before you can use it. To decompress
this Þle, follow the steps listed under the topic ÒDecompressing
the Macintosh utility ÞlesÓ in Chapter 1, ÒBefore You Begin.Ó After
decompressing the Þle, continue with the steps listed below.
Utilities.sea archive Þle on the Macintosh Printer Utilities diskette,
and must be decompressed before you can use it. To decompress
this Þle, follow the steps listed under the topic ÒDecompressing
the Macintosh utility ÞlesÓ in Chapter 1, ÒBefore You Begin.Ó After
decompressing the Þle, continue with the steps listed below.
2.
Locate the LaserWriter Utility Þle in the folder on your hard disk
containing decompressed utility Þles. You may want to place this
utility in a Utilities folder, or leave the utility on your desktop if
you use it often.
containing decompressed utility Þles. You may want to place this
utility in a Utilities folder, or leave the utility on your desktop if
you use it often.
3.
Select the appropriate printer in the Chooser.
4.
Double-click the LaserWriter Utility icon.
5.
Choose Initialize PrinterÕs Disk from the File menu. (This
option is grayed out (unavailable) if no SCSI disk is connected
to the printer.)
option is grayed out (unavailable) if no SCSI disk is connected
to the printer.)
6.
Select the Þle name then click Open.
Macintosh file name
PC file name
LaserWriter Utility
INITDISK.PS*