Xerox 220e 参考指南

If your Phaser 220 printer is shared by other users on a network, using the 
utility Þles and switches to change the printerÕs default color correction 
setting can affect prints made by other users.  

■

All Tektronix driver selections, except Use Printer Setting, 
override the printerÕs switches and downloaded utility Þles.  

■

The Tektronix driverÕs Use Printer Setting option uses the 
printerÕs current default settings as set by one of the utility Þles or 
switches.  

■

On the Phaser 220i, setting Switch 8 up and Switch 9 down enables 
the Vivid Blue color correction.  

■

On the Phaser 220i, setting Switch 8 down and Switch  9 up enables 
the Simulate Press color correction.  

■

On the Phaser 220i, setting both switches in the down position turns 
off all hardware color corrections. 

■

On the Phaser 220i, if both switches are in the up position, the 
factory default is Euroscale Press if no utility Þle has been 
downloaded.

■

On the Phaser 220i, if both switches are in the up position, then you 
can send a utility Þle to the printer to set a color correction.  

■

On the Phaser 220e, setting Switch 3 up causes the current utility Þle 
color correction to be used. 

■

On the Phaser 220e, setting Switch 3 down turns off all color 
corrections. 

■

On the Phaser 220e, if Switch 3 is up, the factory default color 
correction is Vivid Blue if no utility Þle has been downloaded (or, 
you can send a utility Þle to the printer to set a different color 
correction).