Xerox 220e 参考指南
Printing From a Macintosh
2
Printing Reference
2-7
Using the LaserWriter 8.0 printer driver
You can use AppleÕs LaserWriter driver version 8.0 with a Phaser 220 printer,
but the options you select in the LaserWriter 8.0 driverÕs Page Setup and
Print
but the options you select in the LaserWriter 8.0 driverÕs Page Setup and
dialog boxes must be reselected for every print request.
Installing the LaserWriter 8.0 driver
Note
During installation, the LaserWriter 8.0 driver leaves other
versions of the LaserWriter driver intact, so that this driver can
co-exist with the Tektronix driver.
versions of the LaserWriter driver intact, so that this driver can
co-exist with the Tektronix driver.
Refer to the LaserWriter driverÕs documentation, LaserWriter 8.0 Update
Guide, for instructions on installing the driver.
Guide, for instructions on installing the driver.
Using the LaserWriter 8.0 driver with a Phaser 220
The LaserWriter 8.0 driver uses printer-speciÞc 4.1 PPDs (PostScript printer
description Þles) for information on a printerÕs page sizes, TekColor color
corrections, and media type options. To use the LaserWriter 8.0 driver with a
Phaser 220 printer, do the following steps. If the printer is busy, it may take
some time to complete this conÞguration procedure; you may want to do
this procedure when the printer is idle. You only have to conÞgure a printer
once.
description Þles) for information on a printerÕs page sizes, TekColor color
corrections, and media type options. To use the LaserWriter 8.0 driver with a
Phaser 220 printer, do the following steps. If the printer is busy, it may take
some time to complete this conÞguration procedure; you may want to do
this procedure when the printer is idle. You only have to conÞgure a printer
once.
1.
The Phaser 220 Apps.sea archive Þle on the Macintosh Printer
Utilities diskette contains printer description Þles for Phaser 220
printers. Follow the instructions in Chapter 1, ÒBefore You Begin,Ó
to decompress these Þles.
Utilities diskette contains printer description Þles for Phaser 220
printers. Follow the instructions in Chapter 1, ÒBefore You Begin,Ó
to decompress these Þles.
2.
Locate the PPD4.1 Þle for the Phaser 220 in the folder on your hard
disk containing decompressed Þles. Place the Þle with other PPDs
for the LaserWriter 8.0 driver in the Printer Descriptions folder, in
the Extensions folder, inside the System Folder.
disk containing decompressed Þles. Place the Þle with other PPDs
for the LaserWriter 8.0 driver in the Printer Descriptions folder, in
the Extensions folder, inside the System Folder.
3.
Open the Chooser.
4.
Select the LaserWriter 8.0 driver icon.