Xerox 220e 参考指南
Printing Reference
3-1
Chapter
3
Printing From a PC
Using the Tektronix printer driver for Windows
System requirements
The Tektronix Windows printer driver requires the following hardware
and software:
and software:
■
An IBM or compatible computer, with a 386 or higher processor.
■
One ßoppy-disk drive (3.5-inch drive with 1.44-Mbyte capacity),
and a hard disk.
and a hard disk.
■
Two Mbytes of memory.
■
MS-DOS 5.0 or higher operating system, and Windows 3.1.
Accessing on-line help
On-line help is available in two ways:
■
For general Windows 3.1 information about printers and setting
options, select Help from the Control Panel menu bar and choose
a topic from the Help menu. A Help window appears, offering
information on the selected topic and listing other related topics.
options, select Help from the Control Panel menu bar and choose
a topic from the Help menu. A Help window appears, offering
information on the selected topic and listing other related topics.
■
The Tektronix driver uses the Microsoft help Þle PSCRIPT.HLP.
This Þle is shipped with the Microsoft PostScript driver and must
be installed before you can use Help. After installing this Þle, you
can get information about the Tektronix driver by choosing Help
in the Setup dialog box. (Access this dialog box through the
Printers
This Þle is shipped with the Microsoft PostScript driver and must
be installed before you can use Help. After installing this Þle, you
can get information about the Tektronix driver by choosing Help
in the Setup dialog box. (Access this dialog box through the
Printers
dialog box then the Printers-ConÞgure dialog box.)