Xerox 220e 参考指南

When you download a color correction utility Þle to the printer, certain rear 
panel switches must be positioned accordingly for the color correction to 
take effect.  

■

Phaser 220i:
Switches 8 and 9 on the printerÕs rear panel must be in the up 
position before you download a color correction utility Þle, for 
example the Simulate Display (DISPLAY.PS) Þle.  Both switches 
must remain in the up position for the downloaded color 
correction to be available.  If the position of either switch is 
changed, the default color correction changes.  Refer to the topic 
ÒUsing the switches on the printerÕs rear panelÓ  for more 
information.

■

Phaser 220e:
Switch 3 on the printerÕs rear panel must be in the up position 
before you download a color correction utility Þle, for example the 
Simulate Display (DISPLAY.PS) Þle.  This switch must remain in the 
up position for the downloaded color correction to be available.  If 
the position of the switch is changed, the default color correction 
changes.  Refer to the topic ÒUsing the switches on the printerÕs 
rear panelÓ  for more information.

■

A utility Þle color correction is used when you select the 
Use Printer Setting

 option in the Tektronix driver or if you are 

using a non-Tektronix driver. 

■

A utility Þle color correction is overridden by all Tektronix driver 
color correction options, except Use Printer Setting.  

■

A utility Þle color correction remains in effect between print jobs 
and between printer power cycles.  

■

To change any utility Þle color correction, download another 
utility Þle to the printer.