Xerox 3130 用户指南

S

OLVING

 P

ROBLEMS

6.3

For problems with the operation of your printer, refer to the table 
for suggested solutions.

The Printer 
does not print

The printer is not 
receiving power.

Check the power cord connections. Check 
the power switch and the power source.

The printer is not 
selected as the default 
printer.

Select Xerox Phaser 3130 PCL 6 in the 
Printer folder in Windows as your default 
printer.

Check the printer for 
the following:

• The printer cover is not closed.

• Paper is jammed.

• No paper is loaded.

• The toner cartridge is not installed.

If a printer system error occurs, contact 
your service representative.

The printer may be in 
Manual Feed mode.

Add paper to the manual feeder and 

press the 

 button on the printer’s 

control panel to begin printing.

The connection cable 
between the computer 
and the printer is not 
connected properly.

Disconnect the printer cable and 
reconnect it.

The connection cable 
between the computer 
and the printer is 
defective.

If possible, attach the cable to another 
computer that is working properly and 
print a job. You can also try using a 
different printer cable.

The port setting is 
incorrect.

Check the Windows printer setting to 
make sure that the print job is sent to the 
correct port (for example, LTP1). If the 
computer has more than one port, make 
sure that the printer is attached to the 
correct one.

The printer may be 
configured incorrectly. 

Check the printer properties to ensure 
that all print settings are correct.