Xerox 340 补充手册
Locking the transit restraint
Refer to the following illustration while performing these steps.
1.
When the printer displays the
Ready
message, power it down
using the rear-panel
On/Off
switch. The printer places the print
head in the locking position.
Caution
To avoid damaging the printer’s internal components, always
turn the printer power off and lock the transit restraint before
moving the printer. Failure to do so may result in damage to
the printers’ internal components and may invalidate your
printer’s warranty.
turn the printer power off and lock the transit restraint before
moving the printer. Failure to do so may result in damage to
the printers’ internal components and may invalidate your
printer’s warranty.
2.
Locate the transit restraint on the right side of the printer and
insert a wide flat-blade screwdriver into the transit restraint slot.
insert a wide flat-blade screwdriver into the transit restraint slot.
9101-51
2
3