Xerox 340 用户手册
Caring for Your Printer
4
User Manual
4-7
Replacing the maintenance tray
Approximate time to complete: 1 minute
The printer uses the maintenance tray, located inside the printer behind the
front cover, prior to each printing and during cleaning operations. A front
panel message tells you when the maintenance tray is low, allowing you to
make a minimal number of prints before the tray is depleted. Install a new
maintenance tray to continue printing. Each replacement maintenance tray
has a print capacity of approximately 10,000 prints. To avoid printing
delays, keep an extra maintenance tray available for use in the printer.
front cover, prior to each printing and during cleaning operations. A front
panel message tells you when the maintenance tray is low, allowing you to
make a minimal number of prints before the tray is depleted. Install a new
maintenance tray to continue printing. Each replacement maintenance tray
has a print capacity of approximately 10,000 prints. To avoid printing
delays, keep an extra maintenance tray available for use in the printer.
Note
There is a 15-minute warm-up period required after replacing the
maintenance tray.
maintenance tray.
To order a maintenance tray (Tektronix order number 436-0294-03), contact
your local dealer or, in the United States, call Tektronix at 1-800-835-6100.
your local dealer or, in the United States, call Tektronix at 1-800-835-6100.
1.
Open the front cover.
Caution
Some surfaces inside the printer may be hot. Be careful not to
touch the areas marked with this caution icon:
touch the areas marked with this caution icon:
9101-22