Xerox 340 用户手册
Technical Notes
A
User Manual
A-13
Specifications
Printer tilt
Place the printer on a level surface with no more than 3° tilt in any direction.
Equivalent to raising one corner of the printer approximately 2 cm
(0.75 inches.)
Equivalent to raising one corner of the printer approximately 2 cm
(0.75 inches.)
Caution
Tilting the printer more than 3° causes drum fluid to leak from
the maintenance tray resulting in damage to your printer not
covered by the printer’s warranty.
the maintenance tray resulting in damage to your printer not
covered by the printer’s warranty.
Temperature
Operating:
10° C to 35° C (50° F to 95° F)
Nonoperating:
–30° C to +60° C (–22° F to 140° F)
Storage:
–30° C to +60° C (–22° F to 140° F)
Humidity
Operating:
10% to 80% Relative Humidity, noncondensing
Nonoperating:
10% to 95% Relative Humidity, noncondensing
Altitude
Operating:
0 to 2,400 meters (0 to 8,000 feet)
Nonoperating:
0 to 15,000 meters (0 to 50,000 feet)
Primary voltage ranges
(switch-selectable)
87 – 128 VAC, 115 VAC nominal
174 – 250 VAC, 220 VAC nominal
Frequency range
48 to 66 Hz
AC input ratings
115 VAC, 10 Amps
220 VAC, 5 Amps
Printing resolution and speed*
300 x 300 dpi color print on paper: 4 pages per minute
300 x 300 dpi color print on transparency: 2 pages per minute
600 x 300 dpi color print on paper: 2 pages per minute (optionally available)
300 x 300 dpi color print on transparency: 2 pages per minute
600 x 300 dpi color print on paper: 2 pages per minute (optionally available)
* Left and right margins set to 0.3 in. (7.4 mm) or larger.