Xerox 300x 用户手册

Using the rear panel switches for color correction is only necessary 
if you are not set up to use the Phaser 300X drivers.  If you are 
using TekColor Dynamic Correction in the Phaser 300X drivers, 
the settings you choose in the driver override the rear panel 
switches for prints you make from the driver.  

For complete information on color correction, refer to the 
Phaser 300X Drivers and Utilities Printing Reference.

■

The Phaser 300X CD-ROM and diskettes contain color sampler 
charts for CMYK (cyan, magenta, yellow, and black), RGB (red, 
green, and blue), HSB (hue, saturation, and brightness), and 
PANTONE Colors.  The charts consist of colored rectangles and 
coordinate values.  Print out the appropriate chart for your 
application, and use the coordinate values to select colors within 
an application.  For example, your printer can produce 
PANTONE-approved process color simulations.  Use the 
PANTONE Color sampler chart to select the process color values 
within software applications that best simulate PANTONE Colors 
on the Phaser 300X.

For details on printing the charts, refer to the Phaser 300X Drivers 
and Utilities Printing Reference.

The printer software also includes the Color Control Strip feature, which 
allows you to check the consistency of printed colors between prints made 
on the same printer, as well as between prints made on more than one of the 
same type or model of printer.  When this option is selected in the printer 
driver, the printed page includes a band of colors along the bottom edge; the 
colors in this band reflect the currently selected color correction.  For more 
information, refer to the Phaser 300X Drivers and Utilities Printing Reference.