Xerox 3500 用户指南

Your printer and the recommended supplies have been designed and tested to meet strict safety 
requirements. Attention to the following information will ensure the continued safe operation 
of your printer.

„

Use the power cord supplied with your printer.

„

Plug the power cord directly into a properly grounded electrical outlet. Make sure each 
end of the card is securely connected. If you do not know if an outlet is grounded, ask an 
electrician to check the outlet.

„

Do not use a ground adapter plug to connect the printer to an electrical outlet that does not 
have a ground connection terminal.

„

Do not use an extension cord or power strip.

„

Verify that the printer is plugged into an outlet that is capable of providing the correct 
voltage and power. Review the printer’s electrical specifications with an electrician, if 
necessary.

Avoid the potential of electrical shock by ensuring that the printer is properly grounded. 
Electrical products may be hazardous if misused.

„

Do not place the printer in an area where people might step on the power cord.

„

Do not place objects on the power cord.

„

Do not block the ventilation openings. These openings are provided to prevent 
overheating of the printer.

„

Do not drop paper clips or staples into the printer.

Do not push objects into slots or openings on the printer. Making contact with a voltage 
point or shorting out a part could result in fire or electrical shock.

If you notice unusual noises or odors:

Turn off the printer immediately

Disconnect the power cord from the electrical outlet 

Call an authorized service representative to correct the problem.