Xerox 360 软件指南

Before you can send print jobs to a printer through PhaserLink Remote Internet 
Printing Software, complete these steps:

Locate an SMTP email server to which the client software on your PC can 
connect when sending email.  For the fundamentals of email server 
configuration, see “Understanding PhaserLink Remote Internet Printing 
Software fundamental concepts” on page 2.

Establish an email account on a POP3 email server for each printer you 
want to use with PhaserLink Remote Internet Printing software.  For the 
fundamentals of email server configuration, see “Understanding 
PhaserLink Remote Internet Printing Software fundamental concepts” on 
page 2.

Configure each printer you intend to use as a remote printer.  This step is 
described on page 8.

Install the client software on each PC that will send print jobs to remote 
printers.  This step is described in “Installing the client software” on page 14. 

Before you begin the printer configuration process, be sure you have identified the 
following for each printer you will be configuring:

■

Numeric IP address (not the DNS name) of the POP3 email server to which 
the printer will send email  

■

Printer’s email ID on the POP3 email server

■

The POP3 email server password

If you do not know these items, refer to the discussion in “Understanding 
PhaserLink Remote Internet Printing Software fundamental concepts” on page 2 for 
more details, or contact your System Administrator or other source of technical 
support at your company.

Configure each printer that you intend to use with PhaserLink Remote Internet 
Printing Software.  See the following topics for details:

■

■