Xerox 360 软件指南

Before you send a print job to a printer, you may want to make sure that the printer 
is available.  You can get a printer’s status in the form of email messages from the 
printer.  

Start the Destination Manager.

Double-click the printer on which you want a status report.

In the resulting dialog box, click Get Status.  This causes an email message 
to be sent to the email address you specified when you installed the 
PhaserLink Remote Internet Printing Software.

If you want to change this email address, use the Communication Setup dialog box, 
as described in “Receiving printer status email messages” on page 36.       

As with most Windows applications, you can adjust the appearance of the 
Destination Manager, such as choosing whether the toolbar and status bar are 
displayed.

The toolbar contains icons that represent commonly used commands.  By default, 
the toolbar is displayed.  

■

 In the Destination Manager’s main menu, click 

.  Then click Toolbar.  The check mark next to the Toolbar menu 

choice disappears and so does the toolbar. 

■

  In the Destination Manager’s main menu, click 

.  Then click Toolbar.  A check mark next to the Toolbar menu choice 

appears and the toolbar is displayed.

The status bar is a field at the bottom of the Destination Manager window that 
displays a brief explanation of each tool icon in the tool bar, as well as other 
messages.  By default, the status bar is displayed. 

■

  In the Destination Manager’s main menu, click 

.  Then click Status Bar.  The check mark next to the Status Bar menu 

choice disappears and so does the status bar. 

■

 In the Destination Manager’s main menu, click 

.  Then click Status Bar.  A check mark next to the Status Bar menu 

choice appears and the status bar is displayed.