Xerox 300x 用户指南
Getting Started
2
User Manual
2-5
PhaserMatch for Windows
Locating the software
The PhaserMatch software can be used with Phaser 480X, Phaser 480, and
Phaser 440 printers. The software is available in the following locations:
Phaser 440 printers. The software is available in the following locations:
■
On the Phaser 480X CD-ROM. (Part number: 063-2448-00)
■
On the PhaserMatch for Windows diskette.
(Part number: 063-2266-00)
(Part number: 063-2266-00)
System requirements
Note
To use PhaserMatch, you must have the Tektronix driver for
Windows 3.1 installed for a Phaser 480X, a Phaser 480, or a
Phaser 440 printer. Refer to the drivers and utilities manual for
your printer to install the driver.
Windows 3.1 installed for a Phaser 480X, a Phaser 480, or a
Phaser 440 printer. Refer to the drivers and utilities manual for
your printer to install the driver.
PhaserMatch for Windows requires the following hardware and software:
■
An IBM or compatible PC, with a 386, or higher, processor.
■
One floppy-disk drive (3.5-inch drive with 1.44-Mbyte capacity).
■
A hard disk with at least 0.5 Mbyte of available RAM.
■
MS-DOS 5.0 operating system, or higher.
■
Windows version 3.1, or higher.
■
Optional: CD-ROM drive.
For best results, use the following:
■
Super VGA monitor with 800 x 600 dpi or higher resolution.
■
A monitor with 256 or more colors.