Xerox 300x 用户指南
3
Calibrating the Printer
3-16
PhaserMatch
How values are displayed
Values when the dialog box is first opened
The values displayed when the Calibration Curves dialog box is first
opened reflect the calibration settings known by the application.
opened reflect the calibration settings known by the application.
Note
If you used the
Load Calibration command in the File menu to
load a previously saved or imported calibration, those settings are
displayed and used by the application to print the test print.
displayed and used by the application to print the test print.
■
Macintosh: The PhaserMatch application checks the printer’s
current calibration settings. The printer’s settings are used for
printing the Calibration Curves test print, and are used as the
starting point for making modifications to the calibration settings.
current calibration settings. The printer’s settings are used for
printing the Calibration Curves test print, and are used as the
starting point for making modifications to the calibration settings.
■
Windows: The PhaserMatch application uses the last calibration
settings you made for that printer. Your last calibration settings are
used for making the Calibration Curves test print, and are used as
the starting point for making modifications to the calibration
settings. However, your last calibration settings may not be the
same settings currently in the printer if someone else has made
changes. If your last settings in the application don’t match the
printer’s current calibration settings, then printing the Calibration
Curves test print changes the printer’s settings to match the
application’s settings.
settings you made for that printer. Your last calibration settings are
used for making the Calibration Curves test print, and are used as
the starting point for making modifications to the calibration
settings. However, your last calibration settings may not be the
same settings currently in the printer if someone else has made
changes. If your last settings in the application don’t match the
printer’s current calibration settings, then printing the Calibration
Curves test print changes the printer’s settings to match the
application’s settings.