Xerox 300x 用户指南
Editing Profiles
4
User Manual
4-13
3.
Make test prints:
a.
Click the Print button to print a test print on the selected
printer. The test print shows swatches of color at each value.
printer. The test print shows swatches of color at each value.
b.
A PostScript file is provided on the installation diskette or
CD-ROM, that you can use to make the same print on your
target printer.
CD-ROM, that you can use to make the same print on your
target printer.
Or, use an existing test print from your target device.
4.
Measure the density of the samples on the test prints:
The higher the value, the darker the color. You don’t have to
measure all points, but the more points you measure, the more
accurate the calculation is.
measure all points, but the more points you measure, the more
accurate the calculation is.
a.
Click one color at a time: Cyan, Magenta, Yellow, and Black.
b.
Measure pairs of values on both test prints.
c.
Enter the pairs of values in the dialog box using the same
percentage points for each.
percentage points for each.
d.
You must enter the values for 0 percent and 100 percent; you
can leave any other pairs of boxes empty.
can leave any other pairs of boxes empty.
e.
Repeat for each color.