Xerox 550 用户指南
Moving and Shipping
6
User Manual
6-3
Putting the copier mechanism in the parked position
1.
Make sure that the CopyStation’s power is switched off.
2.
Using the tip of a pointed instrument such as a pen, repeatedly
press the button at the top of the CopyStation’s rear panel SCSI ID
switch until it displays the number 9. Setting this switch position
parks the copier mechanism in a safe position for shipping.
press the button at the top of the CopyStation’s rear panel SCSI ID
switch until it displays the number 9. Setting this switch position
parks the copier mechanism in a safe position for shipping.
3.
Switch the CopyStation’s power on and wait 1 minute. During
this time the copier mechanism moves to its parked position.
this time the copier mechanism moves to its parked position.
4.
Switch the CopyStation’s power off and disconnect its power cord.
5.
Set the SCSI ID switch on the CopyStation rear panel back to 5; this
helps speed the next set-up of the CopyStation.
helps speed the next set-up of the CopyStation.
9020-8
9