Xerox 560 用户手册

 

Replace the Transfer Kit (roller/waste bin) soon.  

 

■

 

Toner spots appear on the back 

side of the media.

 

■

 

Repeated light spots.

 

■

 

Print the 

 

 from the front panel.

 

■

 

Check the 

 

 

 

 gauge. 

 

■

 

Print the 

 

 from the front panel or 

access the front panel 

 

 menu.

 

■

 

Check the Transfer Kit 

 

; compare the 

number to the component’s average life (refer to 
page 6-3).

 

Open the printer’s left side door; use the blue handles to pull out the paper feeder.

 

Lift the cover of the paper feeder.  Remove the transfer roller/waste bin; place it on a piece 
of paper on a flat surface.

 

Lock the roller onto the waste bin by placing a piece of paper over the roller and pressing 
down until it snaps tight; rotate the handles 

 

down

 

 to lock the roller in place.  Dispose of the 

old Transfer Kit as normal office waste.

 

Take the new Transfer Kit from its packaging and lower it into the paper feeder.  Rotate the 
handles 

 

down

 

.  Make sure that the roller/waste bin is seated evenly into the opening 

(otherwise, the paper feeder will not close).

 

Lower the paper feeder cover and press on it to lock it in place.

 

Slide the paper feeder back into the printer and close the printer’s left side door.

 

Reset the copy count on the front panel:

 

■

 

The front panel displays this message:

 

■

 

Press the 

 

 button, then press the 

 

 button to automatically reset the copy 

count.

 

If you changed the Transfer Kit before the front panel reported a need to 
replace it, you will have to reset the copy count manually:

 

■

 

Press the

 

button to enter the menu.

 

■

 

Navigate to the 

 

menu; press

 

press