Xerox 560 用户手册

Printing Basics

4-24

Phaser 560 Color Laser Printer

Color corrections

The printer provides TekColor Dynamic Correction, which consists of the
following color correction modes:

You can view sample output of four of the color correction modes at the
bottom of the Startup Page. Refer to page 8-8 for instructions on printing the
Startup Page.

Note

If your printer is on a network and you have changed the front panel
settings, make sure that you tell other users on the network. The front
panel printer settings affect

all

prints made with non-Tektronix

drivers.

Color correction mode

Description

Front panel selection

Driver selection

Automatic

Default setting. Automatically selects the optimum color
correction for speed, vividness, and saturation.

Text and filled areas use

Vivid Color

on opaque media.

RGB bit-mapped images use

Simulate Display

CMYK bit-mapped images use

Commercial Press

None

No correction made to colors.

Vivid Color

Produces the brightest possible colors.

Display

Simulate Display

Adjusts color to closely approximate the colors on a standard
display screen.

SWOP

SWOP Press

Specification for Web Offset Publications. Typically used to
match U.S. press standards.

Euroscale

Euroscale Press

Used to match equivalent 3M Matchprint

proofs.

Commercial

Commercial Press

Used to match commercial 3M Matchprint

proofs.

n/a

Use Printer Setting

Uses the color correction mode specified in the printer’s front
panel setting rather than any printer driver setting.

Monochrome

n/a

Leaves gray as is; converts RGB and CMYK to pure gray.

Raw RGB

n/a

Leaves RGB as is; converts CMYK and gray to RGB.

Raw CMYK

n/a

Leaves CMYK as is; converts RGB and gray to CMYK.

Available only with a downloadable utility file.