Xerox 540 用户指南
Printing
3
User Manual
3-23
Making transparencies
Follow these guidelines when you make transparencies:
■
Use only Tektronix transparencies.
■
When using the transparency tray (
1
), load transparencies with the
printable side down (the notched end is placed closest to the load
level label inside the transparency tray).
level label inside the transparency tray).
■
When using manual feed (
2
), insert the side with the notched end
into the printer first, with the notched corner closest to the front of
the printer.
the printer.
Note
Do not re-use transparencies that have been fed through the
printer once, for example, after jams or if the transparency is
ejected without being printed; you may damage the printer.
printer once, for example, after jams or if the transparency is
ejected without being printed; you may damage the printer.
Also, do not print double-sided. Although your output may look
acceptable, you may shorten the life of the imaging unit.
acceptable, you may shorten the life of the imaging unit.
9008-68
1
2