Xerox 6130 用户指南

When at least 256 MB of memory are added, you can use the secure print feature.

The data stored in the RAM disk is erased when the printer is switched off.

Secure Print is a feature that allows you to assign a password to a print job from the computer, 
send it to the printer for temporarily storing, and start printing the data from the control panel. 
You can also store the print data in the printer without attaching a password. By storing 
frequently-used data in the printer, you can print the data with just an operation from the 
printer, and without sending the data from the computer repeatedly.

You can select whether to delete secure print data after printing.

The procedure to configure Secure Print using the PCL or PostScript print driver is as follows.

Follow the steps for the secure print settings at the computer and send data to the printer for 
printing. Then, follow the steps for the output procedure at the printer to output the printed 
pages.

This section explains the procedure using WordPad on Windows XP as an example. The 
procedure is the same for other operating systems.

The way to display the printer Properties dialog box differs according to the application 
software. Refer to the manual of your respective application software.

Ensure the RAM disk is set to available. You can find this under the Options tab using 

the PCL print driver or the Device Settings tab using the PostScript print driver. The RAM 
disk also needs to be enabled via the control panel. For instructions about enabling options, see 

From the File menu, select Print.

In the Job Type field, select Secure Print.

Click the Setup button.

In the Username field, enter your user name.

In the Password field, enter a numeric password.