Xerox 6180 用户指南

XXX indicates one of the following: the Yellow Toner (Y), Cyan Toner (C), Magenta Toner (M), 

Black Toner (K), or fuser.

NNN indicates a numeric value.

It is nearly time to replace the transfer unit. 

Purchase a new transfer unit.

The fuser is not installed correctly or is not working correctly due 
to damage or malfunction. 

Reinstall the fuser.

The print cartridge has become empty.

Replace the old print cartridge with a new one.

Time to replace the transfer unit. 

Replace the old transfer unit with a new one.

The printer’s internal temperature is too high. 

The printer has been stopped. Wait 1 hour before restarting the 
printer. Ensure the printer has adequate cooling space around it, 
and that the cooling vents are not blocked.

Tray 2 is pulled out. Push Tray 2 into the correct position.

Paper is jammed inside Tray 1 (MPT).

Remove the jammed paper. Open and close the front cover. See 

The front cover is open. 

Close the front cover.

The user is not registered to print in color when using an 
authentication function. 

Contact your administrator.

When the configuration of the printer on the print driver does not 
conform to the printer you are using, this message appears.

Press the Cancel button to cancel the print job.

Make sure that the configuration of the printer on the print driver 
conforms to the printer you are using.