Xerox 6180 用户指南
Configuring the Network Address
Phaser® 6180 Color Laser Printer
3-6
Dynamic Methods of Setting the Printer’s IP Address
There are two protocols available for dynamically setting the printer’s IP address:
■
DHCP (enabled by default on all Phaser printers)
■
AutoIP
You can turn on/off both protocols using the control panel, or use CentreWare IS to turn on/off
DHCP.
DHCP.
Note:
You can view the printer’s IP address at any time. On the control panel, select
Information
, press the OK button, select
Printer Identification
, and then press the
OK button.
Using the Control Panel
To turn on/off either the DHCP or AutoIP protocol:
1.
On the control panel, select the
Menu
button, and then press the OK button.
2.
Select the
Admin
menu, and then press the OK button.
3.
Select the
Network Setup
menu, and then press the OK button.
4.
Select the
TCP/IP
menu, and then press the OK button.
5.
Select
Get IP Address
, and then press the OK button.
Using CentreWare IS
To turn on/off the DHCP protocol:
1.
Launch your web browser.
2.
Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3.
Select Properties.
4.
Select the Protocols folder on the left navigation panel.
5.
Select TCP/IP.
6.
In the Get IP Address field, select the DHCP/Autonet option.
7.
Click the Save Changes button.