Xerox 6180 用户指南

This section explains how to print on custom size paper, such as long paper using the PCL 
print driver.

Custom size paper can be loaded in each tray. The way to load custom size paper in the paper 
tray is the same as the one to load standard size paper. The way to load custom size paper in 
Tray 1 (MPT) is the same as the one to load standard size paper.

When MPT Mode is set to Panel Specified, you need to set the paper type and size settings 
for the tray on the control panel in advance.

Before printing, set the custom size on the print driver.

When setting the paper size on the print driver and control panel, be sure to specify the 

same size as the actual paper used. Setting the wrong size for printing will cause printer 
failure. This is especially true if you configure a bigger size when using a narrow width paper.

On the PCL print driver, set the custom size in the Custom Paper Size dialog box. This 
section explains the procedure using Windows XP as an example.

For Windows 2000 or later, an administrator’s password only allows users with administrator 
rights to change the settings. Users without the rights of administrator can only check the 
contents.

When configuring the Custom Paper Size dialog box in Windows 2000 or later, settings of 
other printers on the computer will also be affected as the form data base of the computer is 
used by a local printer. For a shared printer on the network, settings of other shared printers on 
the same network in another computer will also be affected as the form data base on the server 
with existing print queue is used.

From the Start menu, click Printers and Faxes, and then display the properties of the 
printer to be used.

Select the Configuration tab.

Click Custom Paper Size.

Use the Details list box to select the custom setup you want to define.