Xerox 6180 用户指南

When at least 256 MB of memory are added, you can use the proof print feature.

The data stored in the RAM disk is erased when the printer is switched off.

Proof Print is a feature that allows you to store the print data of multiple copies in the memory, 
print out only the first set to check the print result and if satisfactory, print the remaining 
copies from the control panel.

Proof print data that has become redundant can be deleted using the control panel. See 

To delete all proof print data that has become redundant, see 

on page 5-10.

The procedure to configure Proof Print using the PCL or PostScript print driver is as follows.

First of all, carry out the proof print settings at the computer and send data to the printer for 
printing. Then, carry out the output procedure at the printer to output the printed pages.

This section explains the procedure using WordPad on Windows XP as an example. 

The way to display the printer Properties dialog box differs according to the application 
software. Refer to the manual of your application software.

Ensure the RAM disk is set to available. You can find this under the Device Settings 

tab using the PCL print driver or the Options tab using the PostScript print driver. The RAM 
disk also needs to be enabled via the control panel. For instructions about enabling options, see 

In the Job Type field, select Proof Print.

Click the Setup button.

In the Username field, enter your user name.

If you want to use a specified document name to access the document from the control 
panel:

In the Retrieve Document Name field, select Enter Document Name.

In the Document Name field, enter the name that will appear on the control panel.

If you want the printer to automatically name the document using the application's 
document name, in the Retrieve Document Name field, select Auto Retrieve.