Xerox 7700 用户指南

Calibrate for Paper

If you are not satisfied with the print quality on the paper that you are using, you can 

calibrate the Phaser 7700 Color Printer for the specific paper type that you are using. 
Calibrating paper can change your printer settings for a particular paper type under your 

specific humidity conditions. You must place the paper that you want to calibrate in your 

Multi-Purpose Tray (MPT). The paper type (Laser Paper, Heavy Paper, etc.) that you select 
for the Multi-Purpose Tray (MPT) is the type that you are calibrating. Once you have 

calibrated this paper type, it will be calibrated for all trays. Print the Calibrate for Paper 

page and follow the instructions to calibrate your paper:

If you cancel the calibrating for paper procedure while printing, it changes the 

setting to that of the last page printed. The current setting is only maintained if 

the procedure is allowed to complete.

On the front panel, scroll to the 

menu by pressing the Up or Down Arrow 

key.

Press the OK key.

Select the 

 menu by pressing the Down or Up Arrow key.

Press the OK key.

Select the 

 by pressing the Down or Up Arrow key.

Press the OK key.

Select the 

 by pressing the Down or Up 

Arrow key.

Press the OK key to print the calibration reference pages.

When you review your reference pages, use the page with the Transfer Setting  

closest to zero where there is no toner adherence problem.

Printing problems 

■

Windows users: To change the timeout for transmission retry, refer to the Microsoft 

Online Help for instructions.

■

For more details on page sizes, print areas, and margins, refer to the Phaser 7700 
Color Printer User Guide. To maximize the image area, you may have to adjust the 

margins in your application software.

■

In your application, check the setting for Image Size.

■

Make sure you have selected the correct paper size in the printer driver.