Xerox 7700 安装指导
Networking Setup Guide
9
TCP/IP Configuration
Windows NT
These procedures are valid for Windows NT 4.x. For information about driver installation
for later versions of Windows NT, visit the Xerox web site:
for later versions of Windows NT, visit the Xerox web site:
www.xerox.com/officeprinting/
The following procedures describe how to use the Xerox installer for Windows to set up
the printer in Windows NT 4.x environments.
the printer in Windows NT 4.x environments.
Installation on Workstations for Client-server
Printing
Use this procedure to install the printer on workstations when print jobs are to be sent to
the printer through a print server.
the printer through a print server.
1.
Run the installer as described in page 5.
2.
When prompted, select Easy Install, Minimal Install, or Custom Install. Continue
following the on-screen instructions.
following the on-screen instructions.
3.
If the installer finds the printer (printer device, or physical printer), select Choose a
different printer to identify the printer server queue. If the installer does not find the
printer (printer device, or physical printer), select Choose the printer myself to
identify the printer server queue.
printer (printer device, or physical printer), select Choose the printer myself to
identify the printer server queue.
4.
On the How is your printer connected? screen or dialog box, select Shared by a
network server (client/server).
5.
On the Select a printer to set up dialog box, browse the displayed Network
Neighborhood tree and select the print server queue.
Neighborhood tree and select the print server queue.
6.
Follow the remaining on-screen instructions to complete the installation.